Integrated design of industrialized building systems: The Technology Center of the Sarah Network - CTRS, Brazil

Autores

  • Marieli Azoia Lukiantchuki University of São Paulo - Institute of Architecture and Urbanism
  • Michele Caroline Bueno Ferrari Caixeta IAU-USP
  • Márcio Minto Fabricio University of São Paulo - Institute of Architecture and Urbanism http://orcid.org/0000-0003-1515-6086

DOI:

https://doi.org/10.11606/gtp.v10i1.95913

Palavras-chave:

Arquitetura, Ambiente Construído, Construção de Edifícios

Resumo

The design process of a building should be a collective activity, with the participation of different specialties. In these processes, an effective coordination is necessary to foster interactivity among design team. In Brazil, the hospital design process developed by architect João Filgueiras Lima at the Technology Center of The Sarah Network of Rehabilitation Hospitals (CTRS) is was important example of integrated design to industrialized buildings, by encompassing all stages of the built process. The CTRS was an innovative experience of construction industrialization in Brazil, and also a major center for research. The present study analyzes the integrated design process at the CTRS, through a case study, based on direct observations, guided visits, survey of data in the CTRS design collection and interviews with architect João Filgueiras Lima, known as  Lelé and professionals of his team. The results show the development of all stages of the building in the CTRS, from the planning to the maintenance, which facilitates the design process and improves the building functioning.

Downloads

Os dados de download ainda não estão disponíveis.

Biografia do Autor

  • Marieli Azoia Lukiantchuki, University of São Paulo - Institute of Architecture and Urbanism
    Possui graduação em Arquitetura e Urbanismo pela Universidade Estadual de Maringá (2006), mestrado em Arquitetura e Urbanismo pela Escola de Engenharia de São Carlos, Universidade de São Paulo - EESC/USP e Doutorado em Arquitetura e Urbanismo pelo Instituto de Arquitetura e Urbanismo de São Carlos da Universidade de São Paulo (IAU/USP). É integrante do grupo de pesquisa em Conforto Ambiental nessa mesma instituição. É integrante também do grupo de pesquisa em conforto térmico no ambiente construído: avaliação de desempenho e eficiência energética da Universidade Estadual de Campinas - Unicamp. Atua na área de Arquitetura, Urbanismo e Tecnologia, pesquisando nos seguintes temas: Conforto ambiental, Conforto térmico, ventilação natural, Conforto lumínico, arquitetura hospitalar e João Filgueiras Lima, Lelé.
  • Michele Caroline Bueno Ferrari Caixeta, IAU-USP

    Doutoranda em Arquitetura e Urbanismo pelo Instituto de Arquitetura e Urbanismo da Universidade de São Paulo. Mestre em Arquitetura e Urbanismo pela Escola de Engenharia de São Carlos da Universidade de São Paulo (2011). Graduada em Arquitetura e Urbanismo pela Universidade de São Paulo (2003). É pesquisadora em Tecnologia de Arquitetura e Urbanismo, atuando principalmente nos seguintes temas: gestão de projetos, desenvolvimento de produtos, projeto de arquitetura, arquitetura para a saúde.


    CV LATTES: http://lattes.cnpq.br/3318052871162230

  • Márcio Minto Fabricio, University of São Paulo - Institute of Architecture and Urbanism

    Livre - Docente em Arquitetura, Urbanismo e Tecnologia pela Escola de Engenharia de São Carlos da Universidade de São Paulo - EESC USP (2008), Doutor em engenharia pela Escola Politécnica da USP (2002), Mestre em Arquitetura e Urbanismo pela EESC USP (1996), Engenheiro Civil pela Universidade Federal de São Carlos (1993). 
    Professor da graduação, mestrado e doutorado do Instituto de Arquitetura e Urbanismo da Universidade de São Paulo (IAU USP). 
    Presidente da Comissão de Pós-Graduação do IAU-USP (nov. 2013 - nov. 2015) e Coordenador acadêmico do DINTER IAU-UEM-UEL (2011-2015). 
    Lider do grupo de pesquisa Arquitetura, Inovação e Tecnologia (Arquitec) 
    Coordenador Geral da Rede de pesquisa FINEP/INOVATEC (projeto de pesquisa financiado envolvendo dez instituições brasileiras 2011-2016). 
    Editor do periódico Gestão e Tecnologia de Projetos e revisor de diversas publicações nas áreas de arquitetura e engenharia. 
    Respondeu pela Coordenação do Curso de Graduação em Arquitetura e Urbanismo da EESC-USP (10/2003 a 9/2006). 
    Foi Presidente da Associação Nacional de Tecnologia do Ambiente Construído - ANTAC (10/2012-11/2014) e Diretor de Relações Inter-Institucionais (10/2010 a 10/2012). 
    Atua como assessor ad hoc da FAPESP, CNPQ e parecerista dos seguintes periódicos: Architectural Engineering and Design Management; Ambiente Construído; PARC [pesquisa em arquitetura e construção]; Cadernos do PROARQ (UFRJ); Gestão & Tecnologia de Projetos. 


    CV LATTES: http://lattes.cnpq.br/0618509402775224

Referências

Antunes, B. (2010). Integração desde o princípio [Integration since the beginning]. Revista AU, 23, 58-63.

Caixeta, M. C. B. F., Bross, J. C., Fabricio, M. M., & Tzortzopoulos, P. (2013). Value Generation Through User Involvement in Healthcare Design. Paper presented at the 21st Annual Conference of the International Group for Lean Construction, Fortaleza, Brazil.

Camargo, A. R. (1975). Industrialização da construção no Brasil [Construction industrialization in Brasil]. (Master of Science), Universidade de São Paulo, São Carlos.

Creswell, J. W. (2012). Qualitative inquiry and research design: choosing among five approaches (3 ed.). Thousand Oaks, CA: Sage Publications.

Gallaher, M. P., O’Connor, A. C., Dettbarn, J. J. L., & Gilday, L. T. (2004). Cost Analysis of Inadequate Interoperability in the U.S. Capital Facilities Industry. Gaithersburg, MD.

Girmscheid, G., & Scheublin, F. (2010). New perspective in industrialization in construction - a state-of-the-art report. Zurich: CIB Publication 329.

Guimarães, A. G. L. (2010). A obra de João Filgueiras Lima no contexto da cultura arquitetônica contemporânea [The work of João Filgueiras Lima in the context of contemporary architectural culture]. (PhD), Universidade de São Paulo, São Paulo.

Hamid, Z., Kamar, K. A. M., Zain, M., Ghani, K., & Rahim, A. H. A. (2008). Industrialized building systems(IBS) in Malaysia: the current state and R&D initiatives. Malaysian Construction Research Journal, 2, 1-13.

Jaganathan, S., Nesan, L. J., Ibrahim, R., & Mohammad, A. H. (2013). Integrated design approach for improving architectural forms in industrialized building systems. Frontiers of Architectural Research, 2(4), 377-386.

Kagioglou, M., Cooper, R., Aouad, G., & Sexton, M. (2000). Rethinking construction: the Generic Design and Construction Process Protocol. Engineering, Construction and Architectural Management, 7(2), 141-153.

Latorraca, G. (1999). João Filgueiras Lima, Lelé. Lisboa: Blau.

Lukiantchuki, M. A. (2010). A evolução das estratégias de conforto térmico e ventilação natural na obra de João Filgueiras Lima, Lelé: Hospitais Sarah Salvador e Rio de Janeiro [The evolution of strategies of thermal comfort and natural ventilation in the work of João Filgueiras Lima, Lelé: Hospitals Sarah Salvador and Rio de Janeiro]. (Master of Science), Universidade de São Paulo, São Carlos.

Lukiantchuki, M. A., Caixeta, M. C. B. F., & Fabricio, M. M. (2010). Construction Industrialization and use of prefabricated elements applied in Hospital Buildings Production: Case Study in The Technology Center of The Sarah Network of Rehabilitation Hospitals (CTRS), Brazil. Paper presented at the 18th CIB World Building Congress, Salford, United Kingdom.

Lukiantchuki, M. A., Caixeta, M. C. B. F., & Fabricio, M. M. (2011). Industrialização da construção no Centro de Tecnologia da Rede Sarah (CTRS). Arquitexto vitruvius. 134.04. ano 12, jul. 2011.

Oliveira, L. A., & Melhado, S. B. (2011). Conceptual Model for the Integrated Design of Building Façades. Architectural Engineering and Design Management, 7(3), 190-204.

Oliveira, L. A., Souza, U. E. L., & Sabbatini, F. H. (2002). Produtividade da mão-de-obra na execução de fachadas com painéis pré-fabricados arquitetônicos de concreto [Workmanship productivity in performing facades with architectural precast concrete panels]. Paper presented at the ENTAC, Foz do Iguaçu, Brasil.

Owen, R. L. (2009). CIB White Paper on IDDS Integrated Design & Delivery Solutions. Rotterdam, The Netherlands: CIB Publication 328.

Owen, R. L., Amor, R., Palmer, M., Dickinson, J., Tatum, C. B., Kazi, A. S., . . . East, B. (2010). Challenges for Integrated Design and Delivery Solutions. Architectural Engineering and Design Management, 6(4), 232-240.

Pinho, R. (2011). Lelé: um arquiteto universal [Lelé: a universal architect]. In M. Risselada & G. Latorraca (Eds.), A aquitetura de Lelé: fábrica e invenção. São Paulo: Imprensa Oficial.

Prins, M., & Kruijne, K. (2009). On the Management of Integrated Design Solutions. Does it Work? . Paper presented at the First International Conference on Improving Construction And Use Through Integrated Design Solutions., Finland.

Rekola, M., Kojima, J., & Mäkeläinen, T. (2010). Towards Integrated Design and Delivery Solutions: Pinpointed Challenges of Process Change. Architectural Engineering and Design Management, 6(4), 264-278.

Risselada, M. (2011). A pesquisa paciente: O CTRS como laboratório [The patient research: The CTRS as laboratory]. In M. Risselada & G. Latorraca (Eds.), A arquitetura de Lelé: fábrica e invenção. São Paulo: Imprensa Oficial.

Sanches, I. D. A; Fabricio, M. M. (2008). Projeto para Manutenção [Design for maintenance]. In: VIII Workshop Brasileiro – Gestão do Processo de Projetos na Construção de Edifícios. São Paulo: POLI-USP.

Sanches, I. D. A; Fabricio, M. M. (2009). A importancia do projeto na manutenção de HIS. [The importance of design in housing maintenance]. In: VI Sibragec. João Pessoa.

Segawa, H. (2011). Lelé: tecnologia com sentido social [Lelé: tecnology with social sense]. In M. Risseleda & G. Latorraca (Eds.), A arquitetura de Lelé: fábrica e invenção. (pp. 57-69). São Paulo: Imprensa Oficial do Estado; Museu da Casa Brasileira.

Serrano, J. S. (1980). Alojamiento y tecnologia: industrialización abierta? [Housing and technology: opened industrialization?]. Madrid: Instituto Eduardo Torroja de La Construction y Del Cemento, Consejo Superior de Investigaciones Científicas.

Tam, V. W. Y., Tam, C. M., Zeng, S. X., & Ng, W. C. Y. (2007). Towards adoption of prefabrication in construction. Building and Environment, 42(10), 3642-3654.

van Aken, J. E. (2005). Valid knowledge for the professional design of large and complex design processes. Design Studies, 26(4), 379-404.

van Nederveen, S., Beheshti, R., & Ridder, H. d. (2010). Supplier-Driven Integrated Design. Architectural Engineering and Design Management, 6(4), 241-253.

Yin, R. K. (1994). Case Study Research: Design and Method.

Thousand Oaks, CA: Sage Publications.

Zimmerman, A. (2006). Integrated Design Process Guide: Canadian Mortgage Housing Corporation.

Downloads

Publicado

2015-08-13

Edição

Seção

Artigos

Como Citar

Integrated design of industrialized building systems: The Technology Center of the Sarah Network - CTRS, Brazil. (2015). Gestão & Tecnologia De Projetos, 10(1), 103-118. https://doi.org/10.11606/gtp.v10i1.95913