O uso do BIM para avaliação do desempenho dos edifícios

uma revisão sistemática da literatura

Autores

DOI:

https://doi.org/10.11606/gtp.v14i2.151292

Palavras-chave:

BIM, Ferramentas, Desempenho, Avaliação, Simulação

Resumo

O objetivo do presente estudo é estabelecer uma conexão entre o BIM e o desempenho das edificações, sua busca e sua avaliação, por meio de uma Revisão Sistemática da Literatura (RSL). Foram utilizadas duas bases de dados eletrônicas (Science Direct e Scopus), e foram incluídos artigos de periódicos e congressos escritos em inglês. A RSL resultou na inclusão de 79 artigos, publicados de 2006 a 2017, usados na construção do panorama BIM – desempenho. De acordo com a análise bibliométrica, o assunto em discussão vem crescendo desde 2014. Por meio da leitura dos artigos percebeu-se que existem quatro abordagens principais em que o BIM foi usado na análise de características do desempenho das edificações: um grupo de publicações utilizou as ferramentas BIM em conjunto com as ferramentas de simulações de desempenho; outros artigos discutiram sobre a interoperabilidade de ferramentas BIM e ferramentas de simulação; um terceiro grupo buscou integrar o BIM com dados de sensores; e o último grupo identificado discutiu a integração de ferramentas BIM com sistemas de classificação de construção sustentável. As quatro abordagens foram discutidas o que mostrou que o BIM está sendo usado na busca por um melhor desempenho das edificações e também na investigação do desempenho real das edificações. A primeira abordagem contou com mais da metade das publicações identificadas. Não foi possível identificar uma ferramenta de simulação predominante, seja globalmente seja por tipo de simulação de desempenho. Por outro lado, a ferramenta BIM mais utilizada, independentemente da proposta da publicação, foi a Autodesk Revit.

Downloads

Não há dados estatísticos.

Referências

ABANDA, F. H.; OTI, A. H.; TAH, J. H. M. Integrating BIM and new rules of measurement for embodied energy and CO2 assessment. Journal of Building Engineering, v. 12, p. 288–305, 2017. doi: 10.1016/j.jobe.2017.06.017.

ABDELALIM, A.; O’BRIEN, W.; SHI, Z. Data visualization and analysis of energy flow on a multi-zone building scale. Automation in Construction, v. 84, p. 258–273, 2017. doi: 10.1016/j.autcon.2017.09.012

AGHA-HOSSEIN, M.; BIRCHALL, S.; VATAL, S. Building Performance Evaluation in Non-domestic Buildings – A guide to effective learning. 2015.

ALWAN, Z. BIM performance framework for the maintenance and refurbishment of housing stock. Structural Survey, v. 34, n. 3, p. 242–255, 2016. doi: 10.1108/SS-03-2015-0018.

ALWAN, Z.; GLEDSON, B. J. Towards green building performance evaluation using asset information modelling. Built Environment Project and Asset Management, v. 5, n. 3, p. 290–303, 2015. doi: 10.1108/BEPAM-03-2014-0020.

ATTIA, S.; BELTRÁN, L.; DE HERDE, A.; HENSEN, J. “Architect friendly”: A comparison of ten different building performance simulation tools. In: INTERNATIONAL BUILDING PERFORMANCE SIMULATION ASSOCIATION CONFERENCE AND EXHIBITION, 11, 2009, Glasgow, Scotland. Proceedings... Glasgow, Scotland: International Building Performance Simulation Association (IBPSA), 2009. p.204–211.

AZHAR, S.; BROWN, J. BIM for Sustainability Analyses. International Journal of Construction Education and Research, v. 5, n. 4, p. 276–292, 2009. doi: 10.1080/15578770903355657.

AZHAR, S.; BROWN, J. W.; SATTINENI, A. A case study of building performance analyses using building information modeling. In: INTERNATIONAL SYMPOSIUM ON AUTOMATION AND ROBOTICS IN CONSTRUCTION (ISARC 2010), 27, 2010, Bratislava, Slovakia. Proceedings... Bratislava, Slovakia: 2010. p.213–222.

BARCH, J. A. M. C.; GILLARD, A.; LITTLEWOOD, J. R. The atlantic college case study - Measuring performance to evaluate building simulation and enhance student learning. In: INTERNATIONAL CONFERENCE IN VISUALISATION, 2, 2009, Barcelona, Spain. Proceedings... Barcelona, Spain: 2009. p.102–107.

BAUMGÄRTEL, K.; SCHERER, R. J. Automatic ontology-based Green Building Design Parameter Variation and Evaluation in Thermal Energy Building Performance Analyses. Simulation, v. 2012, n. 27, 2014. Disponível em: https://www.researchgate.net/profile/Ken_Baumgaertel/publication/308075631_Automatic_ontology-based_Green_Building_Design_Parameter_Variation_and_Evaluation_in_Thermal_Energy_Building_Performance_Analyses/links/57d909a708ae0c0081eec9dd.pdf. Acesso em 15/01/2018.

BOTTACCIOLI, L.; ALIBERTI, A.; UGLIOTTI, F.; et al. Building Energy Modelling and Monitoring by Integration of IoT Devices and Building Information Models. In: IEEE ANNUAL COMPUTER SOFTWARE AND APPLICATIONS CONFERENCE (COMPSAC), 41, 2017, Torino, Italy. Proceedings… Torino, Italy: IEEE Computer Society, 2017. v. 1, p.914–922.

CALQUIN, D. A. L.; WANDERSLEBEN, G.; CASTILLO, L. S. Interoperability map between BIM and BPS software. In: COMPUTING IN CIVIL AND BUILDING ENGINEERING, 2014, Orlando, Florida. Proceedings... Orlando, Florida: American Society of Civil Engineers (ASCE), 2014. p.601–608.

CEMESOVA, A.; HOPFE, C. J.; MCLEOD, R. S. PassivBIM: Enhancing interoperability between BIM and low energy design software. Automation in Construction, v. 57, p. 17–32, 2015. doi: 10.1016/j.autcon.2015.04.014.

CEMESOVA, A.; HOPFE, C. J.; REZGUI, Y. An approach to facilitating data exchange between bim environments and a low energy design tool. In: CONFERENCE OF INTERNATIONAL BUILDING PERFORMANCE SIMULATION ASSOCIATION, 13, 2013, Chambéry, France. Proceedings… Chambéry, France: 2013. p. 3234–3241.

CHAISUPARASMIKUL, P. Bidirectional Interoperability Between CAD and Energy Performance Simulation Through Virtual Model System Framework. In: ANNUAL CONFERENCE OF THE ASSOCIATION FOR COMPUTER-AIDED DESIGN IN ARCHITECTURE (ACADIA), 25, 2006, Louisville, Kentucky. Proceedings... Louisville, Kentucky: 2006. p.232–250.

CHEN, C.-J.; CHEN, S.; LI, S.; CHIU, H. Green BIM-based building energy performance analysis. Computer-Aided Design and Applications, v. 14, n. 5, p. 650–660, 2017. doi: 10.1080/16864360.2016.1273582.

CHO, C.; CHEN, D.; WOO, S. Building Information Modeling (BIM) - Based Design of Energy Efficient Buildings. Journal of KIBIM, v. 2, n. 1, p. 1–6, 2012. Disponível em: http://www.koreascience.or.kr/article/ArticleFullRecord.jsp?cn=HBOOB1_2012_v2n1_1. Acesso em 15/01/2018.

CORRY, E.; KEANE, M.; O’DONNELL, J.; COSTA, A. Systematic development of an operational BIM utilising simulation and performance data in building operation. In: CONFERENCE OF INTERNATIONAL BUILDING PERFORMANCE SIMULATION ASSOCIATION, 12, 2011, Sydney, Australia. Proceedings... Sydney, Australia: 2011. p.1422–1429.

DÍAZ-VILARIÑO, L.; LAGÜELA, S.; ARMESTO, J.; ARIAS, P. Semantic as-built 3d models including shades for the evaluation of solar influence on buildings. Solar Energy, v. 92, p. 269–279, 2013. doi: 10.1016/j.solener.2013.03.017.

DRESCH, A.; LACERDA, D. P. ; ANTUNES JÚNIOR, J. A. V. Design science research: método de pesquisa para avanço da ciência e tecnologia. Porto Alegre: Bookman, 2015. 181 p.

EGUARAS-MARTÍNEZ, M.; VIDAURRE-ARBIZU, M.; MARTÍN-GÓMEZ, C. Simulation and evaluation of Building Information Modeling in a real pilot site. Applied Energy, 2014. doi: 10.1016/j.apenergy.2013.09.047.

FOUCHAL, F.; HASSAN, T. M.; FIRTH, S. K. Maintenance, retrofit and operation decision support tool for both domestic and non-domestic buildings. In: COMPUTING IN CIVIL AND BUILDING ENGINEERING, 2014, Orlando, Florida. Proceedings... Orlando, Florida: American Society of Civil Engineers (ASCE), 2014. p.1699–1706.

GERRISH, T.; RUIKAR, K.; COOK, M.; et al. BIM application to building energy performance visualisation and management Challenges and potential. Energy and Buildings, v. 144, p. 218–228, 2017. doi: 10.1016/j.enbuild.2017.03.032.

GÖÇER, Ö.; HUA, Y.; GÖÇER, K. Completing the missing link in building design process: Enhancing post-occupancy evaluation method for effective feedback for building performance. Building and Environment, v. 89, p. 14–27, 2015. doi: 10.1016/j.buildenv.2015.02.011.

GÖÇER, Ö.; HUA, Y.; GÖÇER, K. A BIM-GIS integrated pre-retrofit model for building data mapping. Building Simulation, v. 9, n. 5, p. 513–527, 2016. doi: 10.1007/s12273-016-0293-4.

GUDNASON, G.; KATRANUSCHKOV, P.; BALARAS, C.; SCHERER, R. J. Framework for Interoperability of Information Resources in the Building Energy Simulation Domain. In: COMPUTING IN CIVIL AND BUILDING ENGINEERING, 2014, Orlando, Florida. Proceedings... Orlando, Florida: 2014. p. 617–624.

HABIBI, S. The promise of BIM for improving building performance. Energy and Buildings, v. 153, p. 525–548, 2017. doi: 10.1016/j.enbuild.2017.08.009.

HAMEDANI, M. N.; SMITH, R. E. Evaluation of Performance Modelling: Optimizing Simulation Tools to Stages of Architectural Design. Procedia Engineering, v. 118, p. 774–780, 2015. doi: 10.1016/j.proeng.2015.08.513.

HIYAMA, K.; KATO, S.; KUBOTA, M.; ZHANG, J. A new method for reusing building information models of past projects to optimize the default configuration for performance simulations. Energy and Buildings, v. 73, p. 83–91, 2014. doi: 10.1016/j.enbuild.2014.01.025.

HU, J.; SHEN, E.; GU, Y. Evaluation of Lighting Performance Risk Using Surrogate Model and EnergyPlus. Procedia Engineering, v. 118, p. 522–529, 2015. doi: 10.1016/j.proeng.2015.08.471.

JEONG, W. S.; KIM, J. B.; CLAYTON, M. J.; HABERL, J. S.; YAN, W. A framework to integrate object-oriented physical modelling with building information modelling for building thermal simulation. Journal of Building Performance Simulation, v. 9, n. 1, p. 50–69, 2015. doi: 10.1080/19401493.2014.993709.

JEONG, W. S.; KIM, K. H. A performance evaluation of the BIM-based object-oriented physical modeling technique for building thermal simulations: A comparative case study. Sustainability, v. 8, n. 7, p. 1–27, 2016. doi: 10.3390/su8070648.

JUAN, Y. K.; HSING, N. P. BIM-based approach to simulate building adaptive performance and life cycle costs for an open building design. Applied Sciences, v. 7, n. 837, p. 1–12, 2017. doi: 10.3390/app7080837.

KANELLOS, T.; DOULGERAKIS, A.; GEORGIOU, E.; et al. PYRONES: pyro-modeling and evacuation simulation system. In: SPIE Defense + Security, 2016, Baltimore, Maryland, United States. Proceedings... Baltimore, Maryland, United States: 2016. v. 984216. doi: 10.1117/12.2223162.

KIM, S.-A.; CHOE, Y.; JANG, M.; SEOL, W. Design process visualization system intergrating BIM data and performance-oriented design information. In: INTERNATIONAL SYMPOSIUM ON AUTOMATION AND ROBOTICS IN CONSTRUCTION (ISARC), 28, 2011, Seoul, Korea. Proceedings... Seoul, Korea: 2011. p. 728–733.

KOTA, S.; HABERL, J. S.; CLAYTON, M. J.; YAN, W. Building Information Modeling (BIM)-based daylighting simulation and analysis. Energy and Buildings, v. 81, p. 391–403, 2014. doi: 10.1016/j.enbuild.2014.06.043.

LAING, R.; LEON, M.; MAHDJOUBI, L.; SCOTT, J. Integrating Rapid 3D Data Collection Techniques to Support BIM Design Decision Making. Procedia Environmental Sciences, v. 22, p. 120–130, 2014. doi: 10.1016/j.proenv.2014.11.012.

LEAMAN, A.; STEVENSON, F.; BORDASS, B. Building evaluation: Practice and principles. Building Research and Information, v. 38, n. 5, p. 564–577, 2010. doi: 10.1080/09613218.2010.495217.

LEE, Y. S. Using Building Information Modeling for Green Interior Simulations and Analyses. Journal of Interior Design, v. 37, n. 1, p. 35–50, 2012. doi: 10.1111/j.1939-1668.2011.01069.x.

LEITÃO, A.; BRANCO, R. C.; CARDOSO, C. Algorithmic-based analysis: Design and Analysis in a Multi Back-end Generative Tool. In: International Conference of the Association for Computer-Aided Architectural Design Research in Asia (CAADRIA), 22, 2017, Suzhou, China. Proceedings... Suzhou, China: 2017. p. 137–146.

LIM, Y.-W. Building Information Modeling for Indoor Environmental Performance Analysis. American Journal of Environmental Sciences, v. 11, n. 2, p. 55–61, 2015. doi: 10.3844/ajessp.2015.55.61.

MALTESE, S.; TAGLIABUE, L. C.; CECCONI, F. R.; et al. Sustainability Assessment through Green BIM for Environmental, Social and Economic Efficiency. Procedia Engineering, v. 180, p. 520–530, 2017. doi: 10.1016/j.proeng.2017.04.211.

MIGILINSKAS, D.; BALIONIS, E.; DZIUGAITE-TUMENIENE, R.; SIUPSINSKAS, G. An advanced multi-criteria evaluation model of the rational building energy performance. Journal of Civil Engineering and Management, v. 22, n. 6, p. 844–851, 2016. doi: 10.3846/13923730.2016.1194316.

MITCHELL, J. BIM & building simulation. In: CONFERENCE OF INTERNATIONAL BUILDING PERFORMANCE SIMULATION ASSOCIATION, 12, 2011, Sydney, Australia. Proceedings... Sydney, Australia: 2011. p. 1–7.

MITTERHOFER, M.; SCHNEIDER, G. F.; STRATBÜCKER, S.; SEDLBAUER, K. An FMI-enabled methodology for modular building performance simulation based on Semantic Web Technologies. Building and Environment, v. 125, p. 49–59, 2017. doi: 10.1016/j.buildenv.2017.08.02.

MOON, H. J.; CHOI, M. S.; KIM, S. K.; RYU, S. H. Case studies for the evaluation of interoperability between a BIM based architectural model and building performance analysis programs. In: CONFERENCE OF INTERNATIONAL BUILDING PERFORMANCE SIMULATION ASSOCIATION, 12, 2011, Sydney, Australia. Proceedings... Sydney, Australia: 2011. p.1521–1526.

MOTAWA, I.; CARTER, K. Sustainable BIM-based Evaluation of Buildings. Procedia - Social and Behavioral Sciences, v. 74, p. 419–428, 2013. doi: 10.1016/j.sbspro.2013.03.015.

MOTAWA, I.; JANARTHANAM, S.; ALMARSHAD, A. Live Capture of Energy-related Knowledge into BIM Systems. In: CONSTRUCTION RESEARCH CONGRESS, 2014, Atlanta, Georgia, USA. Proceedings... Atlanta, Georgia, USA: American Society of Civil Engineers (ASCE), 2014. p. 249–258.

NATEPHRA, W.; MOTAMEDI, A.; YABUKI, N.; FUKUDA, T. Integrating 4D thermal information with BIM for building envelope thermal performance analysis and thermal comfort evaluation in naturally ventilated environments. Building and Environment, v. 124, p. 194–208, 2017. doi: 10.1016/j.buildenv.2017.08.004.

NIKNAM, M.; KARSHENAS, S. Sustainable Design of Buildings using Semantic BIM and Semantic Web Services. Procedia Engineering, v. 118, p. 909–917, 2015. doi: 10.1016/j.proeng.2015.08.530.

O’DONNELL, J.; MAILE, T.; SETTLEMYRE, K.; HAVES, P. A. A visualization environment for analysis of measured and simulated building performance data. In: CONFERENCE OF INTERNATIONAL BUILDING PERFORMANCE SIMULATION ASSOCIATION, 13, 2013, Chambéry, France. Proceedings... Chambéry, France: 2013. p.2651–2657.

ODUYEMI, O.; OKOROH, M. Building performance modelling for sustainable building design. International Journal of Sustainable Built Environment, v. 5, n. 2, p. 461–469, 2016. doi: 10.1016/j.ijsbe.2016.05.004.

OTI, A. H. H.; KURUL, E.; CHEUNG, F.; TAH, J. H. M. H. M. A framework for the utilization of Building Management System data in building information models for building design and operation. Automation in Construction, v. 72, p. 195–210, 2016. doi: 10.1016/j.autcon.2016.08.043.

PASINI, D.; MASTROLEMBO VENTURA, S.; RINALDI, S.; et al. Exploiting internet of things and building information modeling framework for management of cognitive buildings. In: SMART CITIES CONFERENCE (ISC2), 2, 2016, Trento, Italy. Proceedings... Trento, Italy: Institute of Electrical and Electronics Engineers Inc, 2016. p.1–6.

PATIÑO-CAMBEIRO, F.; BASTOS, G.; ARMESTO, J.; PATIÑO-BARBEITO, F. Multidisciplinary energy assessment of tertiary buildings: Automated geomatic inspection, building information modeling reconstruction and building performance simulation. Energies, v. 10, n. 7, p. 17, 2017. doi: 10.3390/en10071032.

POSSAN, E.; DEMOLINER, C. A. Desempenho, durabilidade e vida útil das edificações: abordagem geral. Revista Técnico-Científica do CREA-PR, v. 1, n. 2358–5420, p. 1–14, 2013. Disponível em: http://creaprw16.creapr.org.br/revista/Sistema/index.php/revista/article/view/14. Acesso em 15/01/2018.

PRUVOST, H.; SCHERER, R. J. Analysis of Risk in Building Life Cycle Coupling BIM-based Energy Simulation and Semantic Modeling. Procedia Engineering, v. 196, p. 1106–1113, 2017. doi: 10.1016/j.proeng.2017.08.068.

RAHEEM, A. A.; ISSA, R. R. A.; OLBINA, S. Environmental performance analysis of a single family house using BIM. In: COMPUTING IN CIVIL ENGINEERING, 2011, Miami, Florida, USA. Proceedings... Miami, Florida, USA: American Society of Civil Engineers (ASCE), 2011. p.842–849.

RAHMANI ASL, M.; ZARRINMEHR, S.; BERGIN, M.; YAN, W. BPOpt: A framework for BIM-based performance optimization. Energy and Buildings, v. 108, p. 401–412, 2015. doi: 10.1016/j.enbuild.2015.09.011.

REMMEN, P.; CAO, J.; EBERTSHÄUSER, S.; et al. An open Framework for Integrated BIM-Based Building Performance Simulation using Modelica. In: CONFERENCE OF THE INTERNATIONAL BUILDING PERFORMANCE SIMULATION ASSOCIATION, 14, 2015, Hyderabad, India. Proceedings... Hyderabad, India: International Building Performance Simulation Association, 2015. p. 379–386.

RONZINO, A.; OSELLO, A.; PATTI, E.; et al. The energy efficiency management at urban scale by means of integrated modelling. Energy Procedia, v. 83, p. 258–268, 2015. doi: 10.1016/j.egypro.2015.12.180.

SCHLUETER, A.; THESSELING, F. Building information model based energy/exergy performance assessment in early design stages. Automation in Construction, v. 18, n. 2, p. 153–163, 2009. doi: 10.1016/j.autcon.2008.07.003.

SHI, Z.; ABDELALIM, A.; O’BRIEN, W.; et al. Digital campus innovation project: Integration of Building Information Modelling with building performance simulation and building diagnostics. In: SYMPOSIUM ON SIMULATION FOR ARCHITECTURE & URBAN DESIGN, 2015, Alexandria, Virginia, USA. Proceedings... Alexandria, Virginia, USA: The Society for Modeling and Simulation International, 2015. v. 47, p.51–58.

SHOUBI, M. V.; SHOUBI, M. V.; BAGCHI, A.; BAROUGH, A. S. Reducing the operational energy demand in buildings using building information modeling tools and sustainability approaches. Ain Shams Engineering Journal, v. 6, n. 1, p. 41–55, 2015. http://dx.doi.org/10.1016/j.asej.2014.09.006.

SMITH, D. K. Ensuring building performance through simulation. In: WINTER SIMULATION CONFERENCE, 2009, Austin, TX, USA. Proceedings... Austin, TX, USA: 2009. p.2672–2678.

SOLLA, M.; ISMAIL, L. H.; YUNUS, R. Investigation on the potential of integrating BIM into green building assessment tools. ARPN Journal of Engineering and Applied Sciences, v. 11, n. 4, p. 2412–2418, 2016.

SRINIVASAN, R.; KIBERT, C.; THAKUR, S.; et al. Preliminary research in dynamic-BIM (D-BIM) Workbench development. In: WINTER SIMULATION CONFERENCE, 2012, Berlin, Germany. Proceedings... Berlin, Germany: 2012. p.1–12.

STUNDON, D.; SPILLANE, J.; LIM, J. P. B.; TANSEY, P.; TRACEY, M. Building Information Modelling Energy Performance Assessment on Domestic Dwellings : A Comparative Study. In: ANNUAL ARCOM CONFERENCE, 31, 2015, Lincoln, UK. Proceedings... Lincoln, UK: 2015. p.671–679..

SUPRABHAS, K.; DIB, H. N. Integration of BIM and utility sensor data for facilities management. In: COMPUTING IN CIVIL ENGINEERING, 2017, Seattle, Washington. Proceedings... Seattle, Washington: American Society of Civil Engineers (ASCE), 2017. p.26–33.

TANG, P.; HUBER, D.; AKINCI, B.; LIPMAN, R.; LYTLE, A. Automatic reconstruction of as-built building information models from laser-scanned point clouds: A review of related techniques. Automation in Construction, v. 19, n. 7, p. 829–843, 2010. doi: 10.1016/j.autcon.2010.06.007.

TURKASLAN-BULBUL, M. T.; AKIN, O. Computational support for building evaluation: Embedded Commissioning Model. Automation in Construction, v. 15, n. 4, p. 438–447, 2006. doi: 10.1016/j.autcon.2005.06.010.

WANG, C.; CHO, Y. Automated 3D Building Envelope Recognition from Point Clouds for Energy Analysis. In: CONSTRUCTION RESEARCH CONGRESS, 2012, West Lafayette, Indiana, USA. Proceedings... West Lafayette, Indiana, USA: 2012. p.1155–1164.

WANG, C.; CHO, Y. K. Performance Evaluation of Automatically Generated BIM from Laser Scanner Data for Sustainability Analyses. Procedia Engineering, v. 118, p. 918–925, 2015a. doi: 10.1016/j.proeng.2015.08.531.

WANG, C.; CHO, Y. K. Application of As-built Data in Building Retrofit Decision Making Process. Procedia Engineering, v. 118, p.902–908, 2015b. doi: 10.1016/j.proeng.2015.08.529.

WEN, L.; HIYAMA, K. A Review: Simple Tools for Evaluating the Energy Performance in Early Design Stages. Procedia Engineering, v. 146, p.32–39, 2016. doi: 10.1016/j.proeng.2016.06.349.

WONG, J. K. W.; KUAN, K. L. Implementing “BEAM Plus” for BIM-based sustainability analysis. Automation in Construction, v. 44, p. 163–175, 2014. doi: 10.1016/j.autcon.2014.04.003.

WU, W.; YANG, X.; FAN, Q. GIS-BIM based virtual facility energy assessment (VFEA) - Framework development and use case of California State University, Fresno. In: COMPUTING IN CIVIL AND BUILDING ENGINEERING, 2014, Orlando, Florida. Proceedings... Orlando, Florida: American Society of Civil Engineers (ASCE), 2014. p.339–346.

YAN, W.; CLAYTON, M.; HABERL, J.; et al. Interfacing bim with building thermal and daylighting modeling. In: CONFERENCE OF INTERNATIONAL BUILDING PERFORMANCE SIMULATION ASSOCIATION, 13, 2013, Chambéry, France. Proceedings... Chambéry, France: 2013. p.3521–3528.

ZAINUDIN, H.; HARON, N. A.; BACHEK, S. H.; JUSOH, A. Utilization of building information modeling (BIM) in planning an adaptive reuse project of a Traditional Malay House (TMH). INTERNATIONAL CONFERENCE ON VIRTUAL SYSTEM & MULTIMEDIA (VSMM), 22, 2016, Kuala Lumpur, Malaysia. Proceedings... Kuala Lumpur, Malaysia: Institute of Electrical and Electronics Engineers Inc, 2016. p.1–7.

ZANI, A.; TAGLIABUE, L. C.; POLI, T.; et al. Occupancy Profile Variation Analyzed through Generative Modelling to Control Building Energy Behavior. Procedia Engineering, v. 180, p.1495–1505, 2017. doi: 10.1016/j.proeng.2017.04.312.

ZANNI, M. A.; SOETANTO, R.; RUIKAR, K. Towards a BIM-enabled sustainable building design process: roles, responsibilities, and requirements. Architectural Engineering and Design Management, 2016. doi: 10.1080/17452007.2016.1213153.

ZHANG, C.; CHEN, J.; SUN, X.; HAMMAD, A. LIFECYCLE EVALUATION OF BUILDING SUSTAINABILITY USING BIM AND RTLS. In: WINTER SIMULATION CONFERENCE, 2014, Savannah, GA, USA. Proceedings... Savannah, GA, USA: 2014. p.3236–3247.

ZHANG, C.; ONG, L. Investigating building sustainability by applying sensitivity analysis of impact factors during design stage. In: COMPUTING IN CIVIL ENGINEERING, 2017, Seattle, Washington. Proceedings... Seattle, Washington: American Society of Civil Engineers (ASCE), 2017. p.149–156.

Downloads

Publicado

2019-12-17

Como Citar

Leitner, D. S., Scheer, S., & Santos, A. de P. L. (2019). O uso do BIM para avaliação do desempenho dos edifícios: uma revisão sistemática da literatura. Gestão & Tecnologia De Projetos, 14(2), 17-33. https://doi.org/10.11606/gtp.v14i2.151292