Modelagem física da deformação pós-sal em bacias invertidas

Autores

DOI:

https://doi.org/10.11606/issn.2316-9095.v20-157870

Palavras-chave:

Modelagem física, Inversão tectônica de bacias, Deformação do pós-sal, Resistência à deformação rúptil e dúctil

Resumo

Este estudo analisou, em modelos físicos, uma inversão tectônica positiva de bacias com uma camada de sal na sequência pós-rifte. O intuito foi examinar a influência da variação da resistência à deformação da camada dúctil sobre a estruturação da sobrecarga, variando-se as espessuras do silicone (simulando sal) e da sobrecarga, e a velocidade de inversão. Os ensaios foram montados em caixas de areia com dimensões de 35 × 23,4 cm (comprimento × largura), nos quais o embasamento (a sequência pré-rifte) foi simulado por um pacote de areia. Após a fase de distensão e subsequente preenchimento da bacia recém-formada, depositou-se a sequência pós-rifte: um substrato de areia, uma camada de silicone e uma sobrecarga, também de areia. Cortes efetuados nos modelos úmidos após a deformação final de inversão revelaram que o número de falhas na sobrecarga variou significativamente em decorrência da variação da resistência à deformação tanto da camada dúctil quanto da sobrecarga rúptil. No caso da camada dúctil, de silicone, a resistência à deformação cresceu com o aumento da velocidade de deformação, enquanto para a sequência rúptil, de areia, a resistência cresceu quando se elevou a espessura da sobrecarga. Por outro lado, o aumento da espessura da camada dúctil produziu um decréscimo em sua resistência à deformação e acomodou por fluxo a deformação, internamente. A formação de estruturas rúpteis na sobrecarga foi associada ao desenvolvimento de falhas compressivas no pré- e sin-rifte, nucleadas durante a inversão. A reativação de falhas normais somente gerou falhas na sobrecarga quando caracterizadas por alto rejeito. Feições similares ocorrem na Bacia de Tucumán (Argentina).

Downloads

Os dados de download ainda não estão disponíveis.

Referências

Adam, J., Urai J. L., Wieneke, B., Oncken, O., Pfeiffer, K., Kukowski, N., Lohrmann, J., Hoth, S., Van der Zee, Y, Schmatz, J. (2005). Shear localisation and strain distribution during tectonic faulting-new insights from granular-flow experiments and high-resolution optical image correlation techniques. Journal of Structural Geology, 27(2), 283-301. https://doi.org/10.1016/j.jsg.2004.08.008

Bonini, M. (2001). Passive roof thrusting and forelandward fold propagation in scaled brittle-ductile physical models of thrust wedges. Journal of Geophysical Research: Solid Earth, 106(B2), 2291-2311. https://doi.org/10.1029/2000JB900310

Bonini, M., Sani F., Antonielli, B. (2012). Basin inversion and contractional reactivation of inherited normal faults. Tectonophysics, 522, 55-88. https://doi.org/10.1016/j.tecto.2011.11.014

Brun, J. P., Nalpas, T. (1996). Graben inversion in nature and experiments. Tectonics, 15(3), 677-687. https://doi.org/10.1029/95TC03853

Carvalho, T. S. (2017). Cinemática e Geometria de Camadas Rúpteis e Dúcteis Sobre Sistema de Falhas Normais Reativado: Observações a Partir de Modelos Físicos de Caixa de Areia. Dissertação (Mestrado). Minas Gerais: Universidade Federal de Ouro Preto – UFOP.

Chadwick, R. A. (1993). Aspects of basin inversion in southern Britain. Journal of the Geological Society, 150(2), 311-322. https://doi.org/10.1144/gsjgs.150.2.0311

Del Ventisette, C., Montanari, D., Bonini, M., Sani, F. (2005). Positive fault inversion triggering ‘‘intrusive diapirism’’: an analogue modelling perspective. Terra Nova, 17(5), 478-485. https://doi.org/10.1111/j.1365-3121.2005.00637.x

Del Ventisette, C., Montanari, D., Sani, F., Bonini, M. (2006). Basin inversion and fault reactivation in laboratory

experiments. Journal of Structural Geology, 28(11), 2067-2083. https://doi.org/10.1016/j.jsg.2006.07.012

Dooley, T. P., Jackson, M. P. A., Jackson, C. A. L., Hudec, M. R., Rodriguez, C. R. (2015). Enigmatic structures within salt walls of the Santos Basind Part 2: Mechanical explanation from physical modelling. Journal of Structural Geology, 75, 163-187. https://doi.org/10.1016/j.jsg.2015.01.009

Dooley, T. P., McClay K. R., Hempton, M., Smit, D. (2005). Salt tectonics above complex basement extensional fault

systems: results from analogue modelling. Geological Society, London, Petroleum Geology Conference series, 6,

-1648. https://doi.org/10.1144/0061631

Dooley, T., McClay, K. R., Pascoe, R. (2003). 3D analogue models of variable displacement extensional faults: applications to the Revfallet Fault system, offshore mid-Norway. Geological Society, London, Special Publications, 212, 151-167. https://doi.org/10.1144/GSL.SP.2003.212.01.10

Ferrer, O., McClay, K. R., Sellier, N. C. (2016). Influence of fault geometries and mechanical anisotropies on the growth and inversion of hanging-wall synclinal basins: insights from sandbox models and natural examples. Geological Society, London, Special Publications, 439, 487-509. https://doi.org/10.1144/SP439.8

Gabrielsen, R. H., Sokoutis, D., Willingshofer, E., Faleide, J. I. (2016). Fault linkage across weak layers during extension: an experimental approach with reference to the Hoop Fault Complex of the SW Barents Sea. Petroleum Geoscience, 22, 123-135. https://doi.org/10.1144/petgeo2015-029

Gabrielsen, R. H., Zalmstra, H., Sokoutis, D., Willingshofer, E., Faleide, J. I., Braut, H. L. (2019). The influence of mechanically weak layers in controlling fault kinematics and graben configurations: Examples from analog experiments and the Norwegian continental margin. AAPG Bulletin, 103(5), 1097-1110. https://doi.org/10.1306/10261817077

Gomes, C. J. S. (2013). Investigating new materials in the context of analog-physical models. Journal of Structural Geology, 46, 158-166. https://doi.org/10.1016/j.jsg.2012.09.013

Grier, M. E., Salfity, J. A., Allmendinger, R. W. (1991). Andean reactivation of the Cretaceous Salta rift, northwestern Argentina. Journal of South American Earth Sciences, 4(4), 351-372. https://doi.org/10.1016/0895-9811(91)90007-8

Harvey, M. J., Stewart, S. A. (1998). Influence of salt on the structural evolution of the Channel Basin. Geological Society, London, Special Publications, 133(1), 241-266. https://doi.org/10.1144/GSL.SP.1998.133.01.11

Hubbert, M. K. (1937). Theory of scale as applied to the study of geologic structures. Bulletin of the Geological Society of America, 48(10), 1459-1520. https://doi.org/10.1130/GSAB-48-1459

Iaffa, D. N., Sàbat, F., Bello, D., Ferrer, O., Mon, R., Gutierrez, A. A. (2011). Tectonic inversion in a segmented foreland basin from extensional to piggy back settings: The Tucumán basin in NW Argentina. Journal of South American Earth Sciences, 31(4), 457-474. https://doi.org/10.1016/j.jsames.2011.02.009

Jackson, M. P. A., Vendeville, B. C. (1994). Regional extension as a geologic trigger for diapirism. Geological Society of America Bulletin, 106(1), 57-73. https://doi.org/10.1130/0016-7606(1994)106<0057:REAAGT>2.3.CO;2

Jordan, T. E., Isacks, B. L., Allmendinger, R. W., Brewer, J. A., Ramos, V. A., Ando, C. J. (1983). Andean tectonics related to geometry of subducted Nazca plate. Geological Society of America Bulletin, 94(3), 341-361. https://doi.org/10.1130/0016-7606(1983)94<341:ATRTGO>2.0.CO;2

Kley, J, Rossello, E. A., Monaldi, C. R., Habighorst, B. (2005). Seismic and field evidence for selective inversion of Cretaceous normal faults, Salta rift, northwest Argentina. Tectonophysics, 399(1-4), 155-172. https://doi.org/10.1016/j.tecto.2004.12.020

Koyi, H. A. (1995). Mode of internal deformation in sand wedges. Journal of Structural Geology, 17(2), 293-300.

https://doi.org/10.1016/0191-8141(94)00050-A Koyi, H. A., Petersen, K. (1993). Influence of basement faults on the development of salt structures in the Danish Basin. Marine and Petroleum Geology, 10(2), 82-94. https://doi.org/10.1016/0264-8172(93)90015-K

Lake, S. D., Karner, G. D. (1987).The structure and evolution of the Wessex Basin, southern England: an example of inversion tectonics. Tectonophysics, 137(1-4), 347-378. https://doi.org/10.1016/0040-1951(87)90328-3

Luján, M., Storti, F., Rossetti, F., Crespo-Blanc, A. (2006). Extrusion vs. accretion at the frictional–viscous decollement transition in experimental thrust wedges: the role of convergence velocity. Terra Nova, 18(4), 241-247. https://doi.org/10.1111/j.1365-3121.2006.00685.x

Marquillas, R. A., Papa, C., Sabino, I. F. (2005). Sedimentary aspects and paleoenvironmental evolution of a rift basin: Salta Group (Cretaceous–Paleogene), northwestern Argentina. International Journal of Earth Sciences, 94(1), 94-113. https:///doi.org/10.1007/s00531-004-0443-2

McClay, K. R., Ellis P. G. (1987). Analogue models of extensional faults geometries. Geological Society, London, Special Publication, 28(1), 109-125. https://doi.org/10.1144/GSL.SP.1987.028.01.09

Monaldi, C. R., Salfity, J. A., Kley, J. (2008). Preserved extensional structures in an inverted Cretaceous rift basin, northwestern Argentina: Outcrop examples and implications for fault reactivation. Tectonics, 27(1), 1-21. https://doi.org/10.1029/2006TC001993

Nalpas, T., Brun, J. P. (1993). Salt flow and diapirism related to extension at crustal scale. Tectonophysics, 228(3-4), 349-362. https://doi.org/10.1016/0040-1951(93)90348-N

Nalpas, T., Douaran, S. L., Brun, J. P., Unternehr, P., Richert, J. P. (1995). Inversion of the Broad Fourteens Basin (offshore Netherlands), a small-scale model investigation. Sedimentary Geology, 95(3-4), 237-250. https://doi.org/10.1016/0037-0738(94)00113-9

Pichot, T., Nalpas, T. (2009). Influence of synkinematic sedimentation in a thrust system with two decollement levels: analogue modelling. Tectonophysics, 473(3-4), 466-475. https://doi.org/10.1016/j.tecto.2009.04.003

Ruh, J. B., Kaus, B. J., Burg, J. P. (2012). Numerical investigation of deformation mechanics in fold‐andthrust belts: Influence of rheology of single and multiple décollements. Tectonics, 31(3), TC3005. http://doi.org/10.1029/2011TC003047

Smit, J. H. W., Brun, J. P., Sokoutis, D. (2003). Deformation of brittle‐ductile thrust wedges in experiments and nature. Journal of Geophysical Research: Solid Earth, 108(B10), 2480. https://doi.org/10.1029/2002JB002190

Soto, R., Casas-Sainz, A. M., Del Río, P. (2007). Geometry of half-grabens containing amid-level viscous décollement. Basin Research, 19(3), 437-450. https://doi.org/10.1111/j.1365-2117.2007.00328.x

Vendeville, B. C., Cobbold, P. R., Davy, P., Choukroune, P., Brun, J. P. (1987). Physical models of extensional tectonics at various scales. Geological Society, London, Special Publication, 28(1), 95-107. https://doi.org/10.1144/GSL.SP.1987.028.01.08

Vendeville, B. C., Ge, H., Jackson, M. P. A. (1995). Scale models of salt tectonics during basement-involved extension. Petroleum Geoscience, 1(2), 179-183. https://doi.org/10.1144/petgeo.1.2.179

Vendeville, B. C., Jackson, M. P. A. (1992). The fall of diapirs during thin-skinned extension. Marine and Petroleum Geology, 9(4), 354-371. https://doi.org/10.1016/0264-8172(92)90048-J

Weijermars, R., Jackson, M. P. A., Vendeville, B. C. (1993). Rheological and tectonic modeling of salt provinces. Tectonophysics, 217(1-2), 143-174. https://doi.org/10.1016/0040-1951(93)90208-2

Withjack, M. O., Callaway, S. (2000). Active Normal Fauting Beneath a Salt Layer: An Experimental Study of Deformation Patterns in the Cover Sequence. AAPG Bulletin, 84(5), 627-651. https://doi.org/10.1306/C9EBCE73-1735-11D7-8645000102C1865D

Downloads

Publicado

2020-04-16

Edição

Seção

Artigos

Como Citar

Modelagem física da deformação pós-sal em bacias invertidas. (2020). Geologia USP. Série Científica, 20(1), 3-17. https://doi.org/10.11606/issn.2316-9095.v20-157870